Flooring Comparison: Cost, Durability & Maintenance
Pick the flooring types you are weighing up and compare installed cost, lifespan indicators and where each one works best. All costs use standard quality, all-India default rates.
Last reviewed: September 2026
Choose what to compare
Side-by-side comparison
| Flooring | Installed ₹/sq ft | 1,000 sq ft total | Durability | Low maintenance | Water resistance | Best for |
|---|---|---|---|---|---|---|
| Ceramic Tile | ₹90 – ₹175 | ₹89,900 – ₹1,75,100 | Bathrooms, kitchens, balconies, budget rooms | |||
| Vitrified Tile | ₹114 – ₹255 | ₹1,14,450 – ₹2,54,950 | Living rooms, bedrooms, offices, whole-home use | |||
| Porcelain Tile | ₹150 – ₹378 | ₹1,49,800 – ₹3,78,000 | High-traffic areas, outdoor decks, premium interiors |
Estimated cost only. Actual material and labour prices vary by city, brand, quality, installation conditions and supplier. Always confirm current rates with local suppliers or installers before purchasing.
Pros and trade-offs
Ceramic Tile
Glazed clay tiles, the lowest-cost hard flooring commonly laid in Indian homes.
- + Lowest material cost of all hard flooring
- + Wide size and print choice
- + Easy to replace a single damaged tile
- − Chips and cracks under heavy impact
- − Cold and hard underfoot
- − Grout lines need periodic cleaning
Vitrified Tile
Pressed and fired tiles with very low porosity; the default living-room floor in most Indian cities.
- + Hard-wearing and stain resistant
- + Large formats mean fewer grout lines
- + Good value per year of service
- − Slippery when wet
- − Needs a flat, well-prepared base
- − Heavier tiles raise labour cost
Porcelain Tile
Dense, low-absorption tile available in wood and stone finishes, including outdoor-rated grades.
- + Very high density and durability
- + Excellent water resistance
- + Convincing stone and wood finishes
- − Higher material cost
- − Cutting requires specialist blades
- − Installation skill matters more
How this estimate is calculated
Every figure on this page comes from the same formula. Rates are stored as configurable low–high bands per flooring type, overridden by city-level bands where we have them, then scaled by the quality level you pick.
effective_area = floor_area x (1 + wastage% / 100) material_cost = effective_area x material_rate labour_cost = floor_area x labour_rate adhesive_cost = floor_area x adhesive_rate grout_cost = floor_area x grout_rate other_cost = floor_area x other_rate total_cost = material + labour + adhesive + grout + other
Areas entered in square metres are converted using 1 sq m = 10.7639 sq ft. The low total uses every low rate and the high total uses every high rate, so the displayed range is deliberately wide — real quotations usually land somewhere in the middle.
Rates are configurable estimates maintained in our own database, not scraped live market prices, and we do not publish supplier names, reviews or ratings we cannot verify. Rate configuration last reviewed: September 2026.
Want to compare another flooring?
Jump to a cost guide with the calculator already set to that material.