Tile Installation Cost in India

The full installed number for a tiled floor — tiles, fitting labour, adhesive, grout and wastage together — with the extras that commonly appear on the final bill.

Last reviewed: September 2026

Tile installation cost

1Floor area

2Flooring type

3Quality

4Location

Optional — refines local material and labour rates.

Common areas

1000 sq ft 1200 sq ft 1500 sq ft 2000 sq ft

Material
Labour
Wastage
Estimated total

Estimated cost only. Actual material and labour prices vary by city, brand, quality, installation conditions and supplier. Always confirm current rates with local suppliers or installers before purchasing.

1,000 sq ft installed benchmark

Estimated installed flooring cost for 1,000 sq ft by flooring type
Flooring type	Installed ₹/sq ft	1,000 sq ft total
Ceramic Tile	₹90 – ₹175	₹89,900 – ₹1,75,100
Vitrified Tile	₹114 – ₹255	₹1,14,450 – ₹2,54,950
Porcelain Tile	₹150 – ₹378	₹1,49,800 – ₹3,78,000
SPC Flooring	₹127 – ₹291	₹1,26,800 – ₹2,91,200
Vinyl Flooring	₹74 – ₹201	₹74,200 – ₹2,01,300
Laminate Flooring	₹106 – ₹271	₹1,05,500 – ₹2,70,700
Wooden Flooring	₹337 – ₹985	₹3,37,000 – ₹9,84,500
Epoxy Flooring	₹147 – ₹415	₹1,46,500 – ₹4,14,500

Standard quality, all-India default rates, including material, labour, wastage and consumables.

How the installed price breaks down

Roughly, tiles are the largest line, fitting labour is the second, and adhesive plus grout is a small but non-trivial third. Wastage sits inside the material line: order 5–10% more than the floor area to absorb cutting and breakage. For labour rates on their own, see the tile fitting rate guide.

Extras to budget for

Removing the existing floor and disposing of the debris
Levelling screed on an uneven slab
Skirting, charged per running foot
Epoxy grout instead of cement grout
Transport and lifting where there is no service lift

Why flooring prices vary

Material quality and brand: Two vitrified tiles of the same size can differ 3x in price by grade, finish and brand.
City and labour market: Metro labour rates run higher than tier-2 cities; transport adds to material landed cost.
Floor condition: An uneven or damaged base needs levelling screed before any flooring can be laid.
Tile or plank size: Large formats cost more to handle and lay, but use less adhesive and grout per sq ft.
Wastage: Cutting, breakage and pattern matching typically consume 5–10% more material than the floor area.
Removal of existing flooring: Breaking and disposing of an old floor is charged separately, usually per sq ft.
Installation pattern: Diagonal, herringbone and mixed-size layouts increase both cutting waste and labour.
Transportation and lifting: Site access, floor level and lift availability change delivery and shifting charges.

How this estimate is calculated

Every figure on this page comes from the same formula. Rates are stored as configurable low–high bands per flooring type, overridden by city-level bands where we have them, then scaled by the quality level you pick.

effective_area = floor_area x (1 + wastage% / 100)
material_cost  = effective_area x material_rate
labour_cost    = floor_area x labour_rate
adhesive_cost  = floor_area x adhesive_rate
grout_cost     = floor_area x grout_rate
other_cost     = floor_area x other_rate
total_cost     = material + labour + adhesive + grout + other

Areas entered in square metres are converted using 1 sq m = 10.7639 sq ft. The low total uses every low rate and the high total uses every high rate, so the displayed range is deliberately wide — real quotations usually land somewhere in the middle.

Rates are configurable estimates maintained in our own database, not scraped live market prices, and we do not publish supplier names, reviews or ratings we cannot verify. Rate configuration last reviewed: September 2026.

Want to compare another flooring?

Jump to a cost guide with the calculator already set to that material.

Ceramic Vitrified Porcelain SPC Vinyl Laminate Wooden Epoxy

Try another area

500 sq ft 750 sq ft 1,000 sq ft 1,200 sq ft 1,500 sq ft 2,000 sq ft